Laboratory Equipment Details
Complete information about this device
Device Gallery
Available
Reservations
0Views
9Overall service quality rating
0/5
Information about devices and laboratories is clear and updated
0/5
The device search interface is effective
0/5
Steps to request the use of a device are clear
0/5
Devices are in good working condition
0/5
Contributes to obtaining accurate research results
0/5
Devices are available at the required times
0/5
Response to inquiries in a timely manner
0/5
Technical support is qualified
0/5
Contributed to the completion of research
0/5
Recommend your colleagues to use the service
0/5
Device Information
Device Name
End-Sole Adhesion Testing Device
Model
Giuliani- IG/TAS/T
Units Available
1
Manufacture Year
2011
Manufacturer Website
Description
The device consists of a screen with a set of buttons for adjusting values and a shoe holder, a separate component that is adjusted to the device according to the size of the shoe being tested. There are slots on the device's surface for attaching the shoe holder to the required size.
Services & Pricing
| Service | Cost |
|---|---|
| Measuring the adhesion of the shoe's upper to the sole | 150 EGP |
Additional Information
The shoe is placed in its designated slot on the device holder. Pressure is then applied to the part of the shoe to be tested until the upper separates from the sole. The reading displayed on the device screen is then recorded.