Laboratory Equipment Details
Complete information about this device
Device Gallery
Available
Reservations
0Views
266Overall service quality rating
0/5
Information about devices and laboratories is clear and updated
0/5
The device search interface is effective
0/5
Steps to request the use of a device are clear
0/5
Devices are in good working condition
0/5
Contributes to obtaining accurate research results
0/5
Devices are available at the required times
0/5
Response to inquiries in a timely manner
0/5
Technical support is qualified
0/5
Contributed to the completion of research
0/5
Recommend your colleagues to use the service
0/5
Device Information
Device Name
CSM Instruments Pin on disk Tribometer
Model
Pin-on-Disk Tribometer
Units Available
1
Manufacture Year
2015
Manufacturer Website
Description
The CSM Instruments Pin-on-Disk Tribometer is a laboratory-grade tribology testing instrument used to measure friction and wear characteristics of materials. During testing, a stationary pin or ball is pressed against a rotating disk, and data such as coefficient of friction (COF) and wear behavior are recorded as a function of time, load, speed, lubrication, and temperature. This device supports dry or lubricated tests and is widely used for research, quality control, coatings analysis, and material performance evaluation in engineering and materials science.
Services & Pricing
| Service | Cost |
|---|---|
| 0 | - |
Additional Information
Test Method: Pin-on-disk setup for friction and wear measurement. Metallurgia Typical Load Range: ~1 N to ~10 N (laboratory variations possible). Metallurgia Disc Diameter: Typically 16–60 mm, depending on specific configuration.